Gemini LT

Designed for efficiency with the only dual table model that allows technicians to program each table independently, even when one is in firing.

Quality Restorations

• PRECISE TEMPERATURE UNIFORMITY & CONTROL with firing temp. reach to 1180ºC (2156ºF) and accuracy of ± 1ºC
• FULLY ADAPTABLE PROGRAMMING range handles all ceramics on the market today

Time Saving

• FULL CUSTOMIZATION of cooling rate and hold time; pre-programmed tempering process adjusts for different cooling rates of zirconia, metal and porcelain materials
• BOOSTS YIELD with two independent swivel tables. During the cooling phase, the mechanism automatically moves the work away from the hot zone
• OPTIMIZES LAB PRODUCTIVITY by allowing programming of one table while the other is in the firing chamber
• POWER FAILURE PROTECTION ensures that firing resumes after return of electrical power
  
  

Energy Efficient

• Firing chamber lined with superior insulation
• Chamber entrance tightly sealed to hold temp. ready for next cycle
• Single phase electrical supply for low wattage consumption
  
  

Features:

• Intuitive full color digital display
• 200 programs available for each side
• USB port for fast transfer of program data
• Acoustic signals that alert to furnace status

General:

• Dimensions: 450 mm x 450mm x 680mm (H)
• Display screen: 7”
• Muffle chamber: Ø95 mm x 60 mm; Ø 3.7″x 2.6″
• Firing table: Ø 90 mm (Ø 3.5“)

• Weight: 27 Kg (58 lbs)
• Heating Speed: from 10 to 100 °C/50-212ºF
• Pump capacity: 115v 6.3A
• Mains voltage: 115V 1100 W 50/60 Hz
• Vacuum Level Up to 980 mbar (Up to 740 mmHg)
• Pressure: 4.2 Bar
• Time In Min and Sec mm:ss
• Temperature Range 100 ° to 1180 ° C; 112º to 2156ºF

Transportation and storing conditions

• Temperature 0°C to 40°C; 32º to 104ºF
• Relative air humidity Less than 100 % rel. humidity

Operating condition

• Temperature 10°C to 40°C/ 104ºF
• Air Humidity 80 % rel. Humidity up to 31 °C / 88ºF

Instructions